TM-9-2320-280-34

TRUCK, UTILITY: M998 SERIES

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

JANUARY 1996

TM-9-2320-280-34 - Page 813 of 1258

TM 9-2320-280-34

17-9.

CENTER SUPPORT REPAIR (3L80) (Cont ’d)

WARNING

Air pressure must not exceed 15 psi (103 kPa) when air checking

clutch piston, or injury to personnel or damage to equipment may

result.

NOTE

Clutch piston must move up and down freely when air pressure is

applied.

6.

Apply compressed air through center support bolt hole (9) to check operation of clutch piston (6).

7.

Install four oil seals rings (7) on oil delivery sleeve (8). Ensure lap joints on oil seal rings (7) are

properly joined.

17-35