TM-9-2320-280-34

TRUCK, UTILITY: M998 SERIES

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

JANUARY 1996

TM-9-2320-280-34 - Page 987 of 1258

TM 9-2320-280-34

18-4. TRANSFER CASE REPAIR (Model 242) (Cont'd)

17.

Slide mode shift sleeve (18) onto mode shift fork (17).

18.

Slide mode shift fork assembly (16) over mainshaft assembly (14) and align with differential

assembly (13).

19.

Lifting on end of mainshaft assembly (14), holding mode shift fork assembly (16) in place, set end

of mainshaft assembly (14) into input gear in front half-case (4).

20.

Carefully align pin (20) of mode fork (16) in long slot (24) of shift sector (6).

21.

Align mode shift fork (16), and range shift fork (1) in front half-case (4) and insert shift rail (19)

and seat in front half-case (4).

NOTE

It may be necessary to use screw extractor to start tapered

drive pin in range shift fork.

It may be necessary to remove shift lever to install tapered

drive pin.

22.

Align pin hole in range shift fork (1) and shift rail (19) with hole (23) in front half-case (4) and install

tapered drive pin (22) in shift rail (19).

23.

Install plug (21) in front half-case (4).

18-47