TM-9-2320-280-34

TRUCK, UTILITY: M998 SERIES

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

JANUARY 1996

TM-9-2320-280-34 - Page 991 of 1258

TM 9-2320-280-34

18-4. TRANSFER CASE REPAIR (Model 242) (Cont'd)

43.

Install front output yoke (25) on shaft (23) with lockwasher seal (24) and nut (21). Tighten nut (21)

to 90-130 lb-ft (122-176 N.m).

44.

Install driven gear (30), O-ring (29), and pinion adapter (28) in rear retainer (12) with clamp (27) and

capscrew (26). Tighten capscrew (26) to 12-15 lb-in. (1.4-1.7 N.m).

45.

Move shift range lever (22) to make sure transfer shifts into four detent positions. May have to turn

shafts to obtain full detent engagement.

FOLLOW-ON TASK:

Install transfer case (para. 8-3).

18-51