TM-9-2320-283-13-P
ANTI-LOCK BRAKE SYSTEM (ABS) M915A1
TECHNICAL MANUAL; OPERATOR AND FIELD MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST (RPSTL)
AUGUST 2012
TM-9-2320-283-13-P - Page 87 of 400
0014-1
GENERAL
This PMCS uses the one-look format beginning in the driver's side of cab and continuing from outside the cab in
a counterclockwise direction around the tractor.
Refer to table 1 for Operator PMCS of the ABS.
While performing PMCS, ensure components and assemblies are correctly installed.
Incorrect installation may
cause equipment damage or failure.
When checking / servicing an item, ensure that all attaching mounting hardware is properly secured.
Loose,
cracked, broken, or missing hardware may affect equipment performance or cause premature failure.
While performing PMCS, check under vehicle, axles, geared hubs, and inside engine compartment for noticeable
air leaks.
LUBRICATION
There is no lubrication required for the ABS with the exception of packing the front wheel bearings with grease
during installation of the front hubs.
For lubrication instructions for the M915A1 tractor, refer to
TM 9-2320-283-10.
TM 9-2320-283-13&P
0014
OPERATOR MAINTENANCE
PMCS INCLUDING LUBRICATION INSTRUCTIONS
INITIAL SETUP:
References
TM 9-2320-283-10
Back to Top
