TM 9-2320-283-20-1
TROUBLESHOOTING.
2-11.
TROUBLESHOOTING PROCEDURES (Continued).
MALFUNCTION
INSTRUCTION
INDICATION
YES
NO
75.
BOTH 24-VOLT TRAILER STOPLAMPS NOT WORKING (Continued).
NOTE
With positive lead on circuit 36G-DG, check ground with
negative lead for steps 4 thru 8.
4.
Remove circuit breaker
bracket far enough to
access relay RY-3 and
relay connector (para
3-114), and go to step
5.
5.
Remove relay RY-3 (para
3-112), and go to step
6.
6.
Check for voltage at
12-volts dc
Go to step 7.
Clean and
circuit 99Z-BK ground
nominal.
tighten ground
point.
connection.
Install relay
RY-3, relay
connector, and
circuit breaker
bracket (para
3-112 and
2-214