TM-9-2320-283-20-2

TRUCK TRACTOR, LINE HAUL, 50,000 GVWR, 6X4, M915A1

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE PART 2 OF 3

DECEMBER 1983

TM-9-2320-283-20-2 - Page 154 of 852

TM 9-2320-283-20-2

3-91.

HEADLAMP ASSEMBLY REPLACEMENT (Continued)

LOCATION/ITEM

ACTION

REMARKS

A. REMOVAL

NOTE

Replacement of the headlamp assembly

is

the same for both sides.

If only

lamp is being replaced, do steps 1, 2,

3, 4, 18, 19, 20, 21, 22, 23, and 24.

1. Screw (31)

Remove.

2. Bezel (32)

Remove by pushing up and pull-

ing outward to release spring

clip (35) at top.

NOTE

Do not remove adjusting spring and two

adjusting screws which hold

bulb nest

and body together, otherwise headlamp

realignment will become necessary.

3. Three screws (33)

a. Remove

Hold item (4) to pre-

vent it from falling out

while removing three

items (33) and item (3).

Note position of mount-

ing ears on item (3)

for reassembly.

b. Remove item (3).

4. Lamp (4)

Disconnect item (28) and

remove.

5. Six screws (30)

Remove.

6. Bulb nest (6) and

Remove as an assembly.

body (7).

7. Six nuts (25) and

Remove.

six lockwashers

(24).

3-526