TM-9-2320-283-20-2
TRUCK TRACTOR, LINE HAUL, 50,000 GVWR, 6X4, M915A1
TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE PART 2 OF 3
DECEMBER 1983
TM-9-2320-283-20-2 - Page 156 of 852
TM 9-2320-283-20-2
ELECTRICAL SYSTEM.
3-91.
HEADLAMP ASSEMBLY REPLACEMENT (Continued).
LOCATION/ITEM
ACTION
REMARKS
A. REMOVAL (Continued). I
8. Wire (9), wire
Remove
Tag for identification.
(11), wire (12),
wire (13), wire
(14), wire (15),
wire (16), wire
(17), wire (18),
wire (22), wire
(26), and wire
(27).
9. Two screws (23)
Remove.
10.
Wire (10) and
Remove.
wire (21).
11.
Junction block
Remove.
(20) and two
washers (19).
12. Lamp harness (8)
Remove from item (7).
B. INSTALLATION. I
13. Lamp harness (8)
Install on item (7).
14. Junction block
Hold in position and install
Make sure both items
(20) two screws
item (21) and item (10) on
(19) are between fender
(23), two washers
one item (23).
Secure with
and back of mounting
(19), wire (10),
two items (23) and two items
holes in item (20), one
and wire (21)
(19)
on each side.
Connect
according to identifica-
tion tag from step 10.
15. Wire (9), wire
Install on item (13)
Connect according to
(11), wire (12),
identification tag from
wire (13), wire
step 8.
14), wire (15),
wire (16), wire
(17), wire (18),
wire (22), wire
(26), and wire
(27).
3-528
Back to Top
