TM 9-2320-283-20-2
ELECTRICAL SYSTEM.
3-92.
TURN SIGNAL AND MARKER LAMP REPLACEMENT (Continued)
LOCATION/ITEM
ACTION
REMARKS
D. TURN SIGNAL AND MARKER LAMP ASSEMBLY INSTALLATION (Continued). I
19. Clamp (16)
Install on one stud on item
(20).
20. Two nuts (15) and
Install and tighten.
two washers (14).
21. Connector (17)
Install.
22. Lens (7) and
Install and secure with two
Do not over tighten two
gasket (9)
items (8)
items (8).
23. Amber lens (18),
Install and secure with
Do not over tighten eight
red lens (4), and
eight items (5)
items (5).
two gaskets (3).
E. OPERATIONAL CHECK. I
24. Blackout toggle
Set to normal
Refer to TM 9-2320-283-
switch (2)
10.
25. Lamp switch (1)
a.
Pull out to first stop.
b.
Verify that items (6) and
(10) come on.
26. Turn signal
a.
Push lever down.
Verify
control (22)
that left item (10)
flashes.
b.
Push lever up. Verify
that right item (10)
flashes.
NOTE
Follow-on maintenance action required:
None.
3-538