TM 9-2320-283-20-2
ELECTRICAL SYSTEM.
3-114.
MANUAL RESET CIRCUIT BREAKER AND MOUNTING BRACKET REPLACEMENT
(Continued).
LOCATION/ITEM
ACTION
REMARKS
A.
MOUNTING BRACKET REMOVAL.
1.
Three screws (1).
Loosen.
2.
Panel assembly
Open.
(2).
3.
Door assembly (3).
Open.
4.
Three screws (13).
Remove from item (14) and
item (11).
5.
Bracket (11).
Remove from item (14).
NOTE
Only
do step
6 if
you
are removing bracket to install a new one.
6.
Eighteen screws
Remove from item (11) and
(12).
nine items (4).
B.
CIRCUIT BREAKER REMOVAL.
NOTE
Replacement of any of the nine circuit breakers is similar.
Replacement of CB-8 is shown.
7.
Two locknuts (8),
Remove from two items (4).
Tag wires for identifi-
washers (9), bar
cation.
(5), and wires
(6) and (10).
8.
Locknut (8),
Remove from item (4).
Tag wire for identifi-
washer (9), and
cation.
wire (7).
9.
Two screws (12).
Remove from item (11) and
and item (4).
10. Circuit breaker
Remove from item (11).
(4).
3-662