TM 9-2320-283-20-2
ELECTRICAL SYSTEM.
3-123. BATTERY BOX LATCH REPLACEMENT (Continued).
LOCATION/ITEM
ACTION
REMARKS
NOTE
Replacement is the same for both latches.
A. REMOVAL.
1.
Cotter pin (7)
Remove from item (5)
Discard item (7).
2.
Pin (5)
Remove from item (8) and
item (6).
3.
Screw (4), washer
Remove from item (8) and
(9), and nut (10)
item (3).
4.
Two screws (1),
Remove from item (13) and
washers (12), and
item (2).
nuts (11).
B. INSTALLATION.
5.
Two screws (1),
Secure item (13) to item (2).
washers (12), and
nuts (11).
6.
Screw (4), washer
Secure item (8) to item (3).
(9), and nut (10).
7.
Hook (6)
Put in place in item (8).
8.
Pin (5)
Install in item (8) and item
(6).
9.
New cotter pin
Install in item (5).
(7).
NOTE
Follow-on maintenance action required:
Install battery box cover (TM 9-2320-283-10).
3-714