TM-9-2320-283-20-2

TRUCK TRACTOR, LINE HAUL, 50,000 GVWR, 6X4, M915A1

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE PART 2 OF 3

DECEMBER 1983

  TM-9-2320-283-20-2 - Page 346 of 852

TM 9-2320-283-20-2
ELECTRICAL SYSTEM.
3-124. BATTERY CABLE REPLACEMENT (Continued).
LOCATION/ITEM
ACTION
REMARKS
WARNING
Always remove negative battery ground cables first or install them last to avoid sparks that can cause an
explosion Failure to follow this precaution may result in serious injury to you and other personnel.
CAUTION
Make sure batteries are connected in series-parallel Failure to properly connect batteries can result in severe
damage to vehicle electrical system.
NOTE
Use general shop practices when removing and installing cable ties Cable ties are to be used as needed for
securing battery cables.
A. BATTERY CABLE REMOVAL.
1.
Nut (21) and cables
Remove from item (17)
Tag for identification.
(32), (5), and (31).
2.
Nut (21) and cables
Remove from item (17)
Tag for identification.
(31) and (16).
3.
Nut (21) and cables
Remove from item (17)
Tag for identification.
(27) and (28).
4.
Nut (21) and cables
Remove from item (17)
Tag for identification.
(29) and (30).
5.
Nut (21) and cables
Remove from item (17)
Tag for identification.
(28) and (29).
6.
Nut (21) and cable
Remove from item (17)
Tag for identification.
(30).
3-718


Back to Top