TM-9-2320-283-20-2
TRUCK TRACTOR, LINE HAUL, 50,000 GVWR, 6X4, M915A1
TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE PART 2 OF 3
DECEMBER 1983
TM-9-2320-283-20-2 - Page 490 of 852
TM 9-2320-283-20-2
PROPELLER SHAFTS AND UNIVERSAL JOINTS.
3-144.
PRIMARY PROPELLER SHAFT AND UNIVERSAL JOINTS REPLACEMENT (Continued).
LOCATION/ITEM
ACTION
REMARKS
A.
PRIMARY SHAFT ASSEMBLY REPLACEMENT (Continued)
8.
Yoke (10) and
a.
Put an alignment mark
shaft (12)
on each, if not already
done.
b.
Pull item (12) out of item
(10).
c.
Remove item (11) from
Discard item (11).
item (12).
9.
New seal (11)
Lubricate with grease and
install on item (12).
10.
Yoke (10) and
a.
Push item (12) into item
shaft (12)
(10).
b.
Screw item (11) onto item
Be careful not to damage
(10)
threads of item (11).
11.
Shaft assembly
a.
Using suitable jack or
(2)
sling, put in place under
vehicle.
b.
Install two items (7) into
items (1) and (13).
12.
Eight bearing cups
Coat with grease and press
If items (6) will not
(6)
into items (1) and (13) to
slide onto item (7),
secure two items (7)
remove item (6) and
check if any needle
bearing have slipped
out of position.
13.
Eight plates (5)
a.
Position on eight items
(6).
b.
Secure with sixteen items
(4).
c.
Bend up tabs to lock items
(4) in place.
3-862
Back to Top
