TM-9-2320-283-20-2
TRUCK TRACTOR, LINE HAUL, 50,000 GVWR, 6X4, M915A1
TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE PART 2 OF 3
DECEMBER 1983
TM-9-2320-283-20-2 - Page 66 of 852
TM 9-2320-283-20-2
ELECTRICAL SYSTEM.
3-76.
ETHER START SWITCH REPLACEMENT (Continued).
LOCATION/ITEM
ACTION
REMARKS
A. REMOVAL.
1. Four screws (1).
Loosen.
2. Panel (2).
Lower.
3. Knurled nut (8).
Remove.
4. Switch (6).
Remove.
5. Two screws (3),
Remove.
Tag items (5) and (9)
lockwashers (4), and
for identification.
wires (5) and (9).
6. Hex nut (7).
Remove.
B.
INSTALLATION.
7. Wires (5) and (9),
Install.
Connect according to
two screws (3),
identification tags
and lockwashers (4).
from step 5.
8. Hex nut (7).
Install.
Adjust to proper depth
on item (6) to allow in-
stallation of item (8).
9. Switch (6).
Install in item (2).
10. Knurled nut (8).
Install and tighten.
11. Panel (2).
Raise into place.
12. Four screws (1).
Tighten.
13. Batteries.
Connect.
Refer to paragraph 3-120.
C. OPERATIONAL CHECK.
14. Engine.
Start up using cold start
Refer to TM 9-2320-283-
procedure.
10.
NOTE
Follow-on maintenance action required:
None.
3-438
Back to Top
