TM-9-2320-283-20-2
TRUCK TRACTOR, LINE HAUL, 50,000 GVWR, 6X4, M915A1
TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE PART 2 OF 3
DECEMBER 1983
TM-9-2320-283-20-2 - Page 76 of 852
TM 9-2320-283-20-2
ELECTRICAL SYSTEM.
3-78.
HEADLAMP SWITCH REPLACEMENT (Continued).
LOCATION/ITEM
ACTION
REMARKS
A. REMOVAL.
1. Two screws (1).
Loosen.
2. Panel (2).
Lower
3. Release button
Push and hold.
(7).
4. Knob and control
Pull out and remove.
rod (4).
5. Hex nut (5).
Remove.
6. Switch (6).
Remove.
7. Cable tie (8).
Cut and remove.
8. Connector (3).
Remove from item (6).
Disengage two molded
clips from side of item
(6), and remove item
(3).
B. INSTALLATION.
9. Connector (3).
Install on item (6).
Snap molded clips around
side of item (6) to
secure item (3) in
place.
10. New cable tie (8).
Wrap around items (6) and
Trim off excess length
(3) and secure in place.
of item (8).
11. Switch (6).
Install.
12. Hex nut (5).
Install and tighten.
13. Knob and control
Install.
Push in until click is
rod (4).
felt and item (4) locks
into place.
14. Panel (2).
Raise into place.
15. Two screws (1).
Tighten.
3-448
Back to Top
