TM-9-2320-283-34-1
TRUCK TRACTOR, LINE HAUL, 50,000 GVWR, 6X4, M915A1
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE
DECEMBER 1983
TM-9-2320-283-34-1 - Page 112 of 624
TM 9-2320-283-34-1
ENGINE.
3-11. ENGINE MOUNTS REPLACEMENT.
LOCATION/ITEM
ACTION
REMARKS
B. REMOVAL OF REAR ENGINE MOUNTS (Continued).
6.
Washer (9) and insulator (10).
Remove from item (11).
NOTE
Rear engine mount bracket should only be removed if found to be defective. See D. Inspection.
7
Screw (3), clamp
Remove from item (5).
There are two items
(4), and nut (8)
(4) on right side of engine.
8
Four capscrews
Remove from item (20).
(7), washers (6),
bracket (5), and bracket (2).
C. CLEANING.
9
All parts
Clean
Refer to paragraph 3-4.
D. INSPECTION.
10 All parts
Inspect
Refer to paragraph 3-5.
E. INSTALLAIION OF FRONI ENGINE MOUNTS.
11 Two insulators
Install on item (16)
Item (20) will have to
(17) and washers (18).
be raised and blocked about five
inches.
12 Two capscrews
a. Unblock and lower item
Ensure mounting holes
(14), washers
(20) and remove lifting device.
are alined.
(15), and nuts (19).
b. Install two items (14),
Torque to 270-295 lb-ft.
(15), and (19)
3-58
Back to Top
