TM 9-2320-283-34-1
ELECTRICAL SYSTEM.
3-21.
ALTERNATOR AND RECTIFIER REPAIR (Continued).
LOCATION/ITEM
ACTION
REMARKS
C.
TESTING (Continued).
22. Rotor and slipring
b. If a resistance is
assembly (54)
measured then replace
(continued).
item (54).
c. Connect one ohmmeter test
Set ohmmeter to lowest
lead to each item (55).
setting.
d. Ohmmeter reading should be
within 2.3-2.7 ohms.
If
not, check solder joints
for defects.
Repair
defects.
Recheck resis-
tance measurement.
If
2.3-2.7 ohms is not
obtained, then replace
items (54).
3-128