TM-9-2320-283-34-1

TRUCK TRACTOR, LINE HAUL, 50,000 GVWR, 6X4, M915A1

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

DECEMBER 1983

TM-9-2320-283-34-1 - Page 257 of 624

TM 9-2320-283-34-1

3-25.

TRANSMISSION WEAR LIMITS AND REPLACEMENT STANDARDS.

a.

All parts which do not meet the minimum wear standard specified in Table 3-1 will be replaced with new material.

b.

All

used parts considered for reuse must comply with minimum wear standards specified in Table 3-1.

Parts

must be closely inspected to ensure there is no damage in areas not listed in Table 3-1, which would make them unfit for

further use.

c.

To measure cone in clutch plates, put clutch plate on a smooth level surface and measure from inside diameter

of clutch plate and level surface.

See illustration below:

TA 2381

3-204