TM-9-2320-283-34-1

TRUCK TRACTOR, LINE HAUL, 50,000 GVWR, 6X4, M915A1

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

DECEMBER 1983

TM-9-2320-283-34-1 - Page 277 of 624

TM 9-2320-283-34-1

TRANSMISSION.

3-27.

TRANSMISSION REPLACEMENT (Continued).

LOCATION/ITEM

ACTION

REMARKS

B.

INSTALLATION (Continued).

14. Jack stands.

Remove from rear of vehicle

and lower vehicle slowly.

15. Transmission (12)

Slowly raise and move jack

and transmis-

inward so guide pins (15) are

sion jack.

aligned with mounting holes of

item (12).

16. Eight screws (10)

Install finger tight in item

There will be two holes

and washers (11).

(12) at proper locations.

without screws.

These

are used for coolant

line and filter mount-

ing bracket and will be

installed during follow-

on maintenance.

NOTE

It may be necessary to exert pressure on the transmission mount spring so the two screws can

be installed.

17. Two pins (15).

Remove and install two

remaining items (10) and

(11) finger tight.

18. Two clamps (5),

Position in correct order on

mount (8), plate

item (12).

(9), and spring

(7).

19. Two screws (6).

Install in two holes of items

(5), (7), (8), (9) and (12)

and tighten.

3-224