TM-9-2320-283-34-1
TRUCK TRACTOR, LINE HAUL, 50,000 GVWR, 6X4, M915A1
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE
DECEMBER 1983
TM-9-2320-283-34-1 - Page 283 of 624
TM 9-2320-283-34-1
TRANSMISSION.
3-28.
INSTALLATION AND REMOVAL OF TRANSMISSION ON HOLDING FIXTURE (Continued).
LOCATION/ITEM
ACTION
REMARKS
A.
CLEANING.
CAUTION
During disassembly all parts must be handled with care to avoid nicking,
scratching, or denting.
Close fitting parts can bind if damaged or scratched.
NOTE
Steam
cleaning
should be
followed immediately by disassembly to avoid rust of internal parts
due to condensation.
1.
Transmission
Clean.
Refer to paragraph 3-4.
assembly (7).
B.
INSTALLATION.
2.
Holding fixture
a.
Remove four items (4)
(2).
and four items (3).
b.
Place item (2) onto
Use tool number J-24310.
transmission case.
c.
Line up tool with four
items (6).
d.
Install four items (1),
Use 1/2"-13 x 2-1/2"
into item (2) and item
screws.
(7).
e.
Install and tighten four
Use 1/2"-13 nuts.
items (5).
f.
Mount item (2) to suitable
support.
3-230
Back to Top
