TM-9-2320-283-34-1
TRUCK TRACTOR, LINE HAUL, 50,000 GVWR, 6X4, M915A1
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE
DECEMBER 1983
TM-9-2320-283-34-1 - Page 289 of 624
TM 9-2320-283-34-1
TRANSMISSION.
3-29.
GOVERNOR,
FLYWHEEL ,
TURBINE,
AND STATOR REMOVAL
(Continued).
LOCATION/ITEM
ACTION
REMARKS
REMOVAL.
CAUTION
During disassembly all parts must be handled with care to avoid nicking,
scratching or denting.
Close fitting parts can bind if damaged or scratched.
NOTE
Exterior of transmission should be thoroughly cleaned before beginning disassembly.
Steam
cleaning should be followed immediately by disassembly to avoid rust of internal parts due to
condensation.
1.
Flange (9).
a.
Clean and inspect output
shaft threads.
b.
Remove item (10).
After initial breakaway,
nut must require (300
lb.-in.) torque to
turn, if less than (300
lb.-in.), discard nut.
c.
Remove item (9).
2.
Cover (5).
Remove two items (4).
Discard item (6).
3.
Governor (12).
a.
Remove items (13), (14),
Discard item (13).
and four items (15).
b.
Remove items (11) and
Rotate item (12) clock-
(12).
wise to remove.
4.
Retainer (16).
a.
Remove items (17) and
(16).
b.
Remove item (18).
Use needle nose pliers.
3-236
Back to Top
