TM-9-2320-283-34-1
TRUCK TRACTOR, LINE HAUL, 50,000 GVWR, 6X4, M915A1
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE
DECEMBER 1983
TM-9-2320-283-34-1 - Page 317 of 624
TM 9-2320-283-34-1
TRANSMISSION.
3-33.
REAR COVER AND LOW REVERSE CLUTCH REMOVAL (Continued).
LOCATION/ITEM
ACTION
REMARKS
REMOVAL (Continued).
CAUTION
During disassembly all parts must be handled with care to avoid nicking, scratching or denting.
Close fitting parts can bind if damaged or scratched.
NOTE
Keep drain pan under transmission.
Fluid will drip when transmission is turned over.
1.
Rear cover assembly
a.
Rotate item (2) so that
(7) rear faces up.
b.
Remove twenty-four items
(8) and (9) from item (7).
c.
Attach item (11) to item
Bracket must be made
(7) output shaft
from extra nut, fitting output shaft,
and suitable metal stock.
CAUTION
Low ring planetary gear may stick in rear cover assembly upon removal.
Support it to prevent it
from dropping.
d.
Using item (12), remove item (7).
e.
Remove item (6).
3-264
Back to Top
