TM 9-2320-283-34-1
TRANSMISSION.
3-34.
ADAPTER HOUSING, FIRST-REVERSE CLUTCH, AND CENTER SUPPORT REMOVAL
(Continued).
LOCATION/ITEM
ACTION
REMARKS
REMOVAL (Continued)
3
Center support
a
Install item (7) onto item
housing assembly
(6).
(2).
b
Install item (10)
Use tool number
J-24208-3.
c
Install two items (11) to
Short screws from rear
hold items (10) and (7)
cover will work.
to item (13).
d
Turn item (13) so that
item (10) is at bottom.
e
Remove items (8) and (9).
f
Remove item (1).
g
Install item (12) into
Use tool number J-24195.
groove of center support
hub.
CAUTION
A cold transmission case may have to be warmed to remove center support. DO NOT USE A
TORCH; case damage will result.
Use a heat lamp or heat gun.
h
Lift item (2) out of case
If item (2) starts to
move then binds, back
down then lift again.
See paragraph 3-42 for
item (2) repair instruc-
tions.
Remove tool from item
(2).
NOTE
Follow-on maintenance action required:
Proceed with transmission maintenance.
3-272