TM-9-2320-283-34-1

TRUCK TRACTOR, LINE HAUL, 50,000 GVWR, 6X4, M915A1

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

DECEMBER 1983

TM-9-2320-283-34-1 - Page 381 of 624

TM 9-2320-283-34-1

TRANSMISSION.

3-39.

CONVERTER HOUSING AND FRONT SUPPORT REPAIR (Continued).

LOCATION/ITEM

ACTION

REMARKS

C.

ASSEMBLY (Continued).

13. Charging oil pump

a.

Coat oil seal bore in

assembly (37).

item (34) with sealant.

NOTE

Lip of oil seal must face down when installing.

b.

Install new item (35)

Use seal installer number

using installation tools.

J-24198 and handle number

J-24202-4.

Seat fully.

NOTE

Install drive and gears in same direction as removed.

c.

Install items (32) and

(33) onto item (34).

d. Install item (29) through

Torque item (29) to 9-11

(31) and into item (34).

lb-ft.

e.

Using a feeler gage, check

Replace item (37) if

end clearance of item

clearance exceeds .006

(32) through opening (41).

inch.

f.

Using a feeler gage, check

Replace item (37) if

end clearance of item (33)

clearance exceeds .006

through opening (42).

inch.

g.

Install item (30) onto

item (31).

h.

Install two items (43)

Use tools number

into holes of item (34).

J-24315-1.

CAUTION

Square hole in pump cover must align with square hole in converter housing.

Parts damage will

result if not aligned correctly.

3-328