TM 9-2320-283-34-1
TRANSMISSION.
3-40. FORWARD CLUTCH AND INPUT SHAFT REPAIR (Continued).
LOCATION/ITEM
ACTION
REMARKS
A. DISASSEMBLY (Continued).
NOTE
Do not remove collector ring unless damaged or if PTO gear must be replaced (see step 3).
2. Ring (5)
a. Position item (6) in a
Support item (5) in a
suitable press, with input suitable fixture.
shaft up.
CAUTION
Be sure entire assembly is supported from below to prevent injury or parts damage.
b. Carefully press item (7)
out of item (5).
3-338