TM-9-2320-283-34-1

TRUCK TRACTOR, LINE HAUL, 50,000 GVWR, 6X4, M915A1

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

DECEMBER 1983

TM-9-2320-283-34-1 - Page 487 of 624

TM 9-2320-283-34-1

TRANSMISSION.

3-45.

REAR COVER REPAIR.

THIS TASK COVERS

a.

Disassembly.

b.

Cleaning.

c.

Inspection.

d.

Assembly.

INITIAL SETUP

EQUIPMENT CONDITION

APPLICABLE CONFIGURATIONS

PARAGRAPH

CONDITION DESCRIPTION

All.

3-33.

Subassembly removed from

transmission.

TEST EQUIPMENT

None.

SPECIAL TOOLS

Seal and dust shield remover

Orifice plug installer

(33287) J-24171.

(33287) J-24369.

Output shaft seal installer

Governor support pin installer

(33287) J-24202-4 and J-24202-1A.

(33287) J-28684.

Output shaft bushing installer

Slide hammer

(33287) J-24203.

(33287) J-6125-1.

Speedometer bushing remover and installer

Clutch piston seal protector

(33287) J-24204.

(33287) J-24210.

MATERIALS/PARTS (P/N)

Oil, lubricating: OE/HDO-10

Item 16, Appendix B.

Sealer, nonhardening

Item 28, Appendix B.

Grease, high temperature

Item 8, Appendix B.

Kit, transmission overhaul

(73346) 6885217.

PERSONNEL REQUIRED

SPECIAL ENVIRONMENTAL CONDITIONS

Two (MOS-63W).

Work area clean and away from blowing

dirt and dust.

REFERENCES (TM)

GENERAL SAFETY INSTRUCTIONS

TM 9-2320-283-34P.

None.

TROUBLESHOOTING REFERENCES

Paragraph 2-7.

3-434