TM 9-2320-283-34-1
TRANSMISSION.
3-45.
REAR COVER REPAIR (Continued).
LOCATION/ITEM
ACTION
REMARKS
D.
ASSEMBLY (Continued).
8
Cover (9) (continued)
n. Install item (24) into item (9).
Threaded end up.
o. Install item (20) making
sure it is fully expanded
into groove of item (9).
p. Install item (19), lip
Coat inside of item (19)
side first, using items
with high temperature
(37) and (38)
grease Use special tools numbers J-
24202-4 and J-24202-1A.
q. Install item (18)
Coat outside edge of item (18) with
non-hardening sealer before
installation. Seat flush with housing.
r. Store assembly in a clean
dry place until final
transmission assembly.
NOTE
Follow-on maintenance action required:
Proceed with transmission maintenance.
3-448