TM 9-2320-283-34-1
TRANSMISSION.
3-45.
REAR COVER REPAIR (Continued).
LOCATION/ITEM
ACTION
REMARKS
D. ASSEMBLY (Continued).
8.
Cover (9) (continued).
NOTE
Use
care
to prevent
lips
of seals folding back during assembly. If installation is difficult,
remove piston and check seals and cover bore before attempting assembly again.
f. Install item (4) into item
Use tool No. J-24210 to
(9) with spring mounts up.
center and guide item (4) into item
(9).
g. Remove tool, and install
thirty items (3) onto item (4).
h. Install item (2), cupped
side toward item (3).
NOTE
Place snapring in before compressor tool.
i Use items (30) and (31)
Use tool numbers
to compress item (2) and
J-24204-2 and J-24204-1.
install item (1).
j. Remove items (30) and (31).
3-444