TM 9-2320-283-34-1
TRANSMISSION.
3-49.
ADAPTER HOUSING, LOW-REVERSE CLUTCH, REAR COVER, AND GOVERNOR INSTALLATION.
(Continued).
LOCATION/ITEM
ACTION
REMARKS
ASSEMBLY.
1.
Housing (3) and
a.
Place item (5) on table
low-reverse clutch
with short splines down.
pack (4) and (6).
NOTE
Soak clutch pack in OE/HDO-1O lubricating oil for 2 minutes
before installing.
b.
Place items (4) and (6)
on table with plate label-
ed "top" facing up.
c.
Flip first three plates
Plate labeled "top"
over clutch pack. Lay
should be facing down
aside.
on table.
d.
Starting with item (6),
alternately install five
items (4) and five items
(6) into item (5).
e.
Aline external teeth.
f.
Place item (3) with piston
retaining ring facing up
onto assembled item (5),
(4), and (6).
g.
Install item (2) onto item
Retain gasket with oil
(3) and aline holes.
soluble grease.
NOTE
It will be necessary to have a helper during the next five steps.
h.
Grasp the assembled item
Do not let plates drop.
(3) and turn it over.
3-500