TM 9-2320-283-34-1
TRANSMISSION.
3-49.
ADAPTER HOUSING, LOW-REVERSE CLUTCH, REAR COVER, AND GOVERNOR INSTALLATION.
(Continued).
LOCATION/ITEM
ACTION
REMARKS
ASSEMBLY (Continued).
CAUTION
Do not lift lower planetary carrier by ball bearing. Carrier may
drop and be damaged.
2.
Rear cover assem-
a.
Install item (7) with
bly (9).
bearing facing up into
item (5).Carefully aline
the four items (7) with
spline in item (5).
b.
Install item (8) onto item
Retain gasket with oil
(9) and aline holes.
soluble grease.
c.
Attach item (19) to rear
shaft of item (9).
d.
Using item (20), position
item (9) over item (3).
e.
Slowly guide item (9) down
Be sure rear collar is
onto item (3) keeping
fully seated to item
dowel pins in line with
(3).
item (3).
f.
Install twenty-one items
Torque all screws to
(10) and twenty-one items
67-80 lb-ft.
(11) into item (9).
g.
Install three items (13)
Torque all screws to
and (12) into item (9).
67-80 lb-ft.
h.
Install item (17) into
item (9) by turning it
counterclockwise.
e.
Install item (16) onto
item (15).
j.
Install item (15) onto
Torque all screws to
item (9) and retain it
10-13 lb-ft.
with four items (14).
3-504