TM-9-2320-283-34-1
TRUCK TRACTOR, LINE HAUL, 50,000 GVWR, 6X4, M915A1
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE
DECEMBER 1983
TM-9-2320-283-34-1 - Page 573 of 624
TM 9-2320-283-34-1
TRANSMISSION.
3-38.
TORQUE CONVERTER PUMP REPAIR (Continued).
LOCATION/ITEM
ACTION
REMARKS
INSTALLATION.
CAUTION
During installation all parts must be handled with care to avoid
nicking, scratching, or denting.
Close fitting parts can bind if
damaged or scratched.
NOTE
Be sure bearing race, thrust bearing, and two seal rings have
been installed at rear of converter housing.
1.
Housing (2).
a.
Attach item (1) to item
(2) and raise above
transmission.
NOTE
Two bolt cover in converter housing must
be at
the top of
the
transmission.
b.
Install two items (3),
Use tool No.
J-1126-1.
(one into item (2) and one
into transmission).
c.
Install two items (4) into
Use tool No.
J-6889-1.
top of item (5) and guide
Exit port of item (5)
two items (4) when item
must face upward toward
(2) is being lowered on
item (2).
Entrance port
item (3).
of item (5) faces out-
ward toward item (6).
CAUTION
Lower housing slowly onto transmission to avoid damage to
front pitot and oil collector ring.
3-520
Back to Top
