TM-9-2320-283-34-1

TRUCK TRACTOR, LINE HAUL, 50,000 GVWR, 6X4, M915A1

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

DECEMBER 1983

TM-9-2320-283-34-1 - Page 579 of 624

TM 9-2320-283-34-1

TRANSMISSION.

3-52.

TORQUE CONVERTER PUMP AND STATOR INSTALLATION (Continued).

LOCATION/ITEM

ACTION

REMARKS

INSTALLATION.

CAUTION

During repair

all

parts must

be handled with care to avoid

nicking, scratching, or denting.

Close fitting parts can bind if

damaged or scratched.

1.

Torque converter

a.

Be sure item (1) is in-

Lubricate item (1).

pump assembly (2).

stalled on hub of item

(2).

NOTE

Align slots

(location A) in

pump hub with tangs in drive gear as

pump is being installed.

b.

Install item (2) onto item

(6).

NOTE

Since pump bearing is a press fit on the ground sleeve, it may

be necessary to heat the hub and bearing area of pump

assembly to 300 F with heated oil before installation.

c.

Install item (3) onto item

(6).

d.

Install item (4).

Use tool number 26598A.

3-526