TM 9-2320-283-34-2
REAR TANDEM AXLES.
3-76. REAR-REAR AXLE CARRIER REPAIR (Continued).
LOCATION/ITEM
ACTION
REMARKS
59. Adjusters (8) and
Refer to illustrations and
(41).
adjust backlash if contact
patterns are similar to
illustrations.
a. If pattern is too far off
tooth toe, add backlash by
loosening item (8) on the
back face side of item
(33) one notch at a time.
Tighten item (41) until it
contacts item (42).
Continue to tighten item
(41) two or three notches.
Recheck backlash.
b. If pattern is too far
toward tooth heel, remove
backlash by loosening item
(41) on the tooth side of
item (33) one notch at a
time.
Tighten item (8)
until it contacts item
(7). Continue to tighten
the same item (8) two or
three notches. Recheck
backlash.
3-728