TM 9-2320-283-34-2
BRAKE SYSTEM.
3-80. BRAKE TREADLE VALVE REPAIR (Continued).
LOCATION/ITEM
ACTION
REMARKS
NOTE
Before assembly, lubricate all pre-
formed packings, O-rings, bores, and
mating surfaces with GAA grease.
22. New valve (30).
23. New packing (27)
and O-ring (29).
24. Ring (31).
25. New packings (9)
and (10).
26. New valve (13).
27. Clip (12).
28. New spring (20).
29. Seat (21).
30. New nut (22).
31. New packing (19).
32. Spring (11).
33. Piston (8).
Install onto item (28).
Install in item (28).
Using snapring pliers,
install item (31) into item
(28).
Install onto item (8).
Install in item (14).
Using snapring
install item 12) into item
pliers,
(14).
Install with beveled side of
item (20) towards top of
item (18).
Install onto item (20).
Install and tighten onto item
(18).
Install onto item (18).
Install into top of item
(14).
Place onto item (11).
Make certain item (31)
fits correctly in the
groove of item (28).
Set assembled item (28)
aside.
Make certain item (12)
fits correctly in the
groove of item (14).
Item (11) is a small
diameter spring as com-
pared to item (17).
3-750