TM 9-2320-283-34-2
BRAKE SYSTEM.
3-80. BRAKE TREADLE VALVE REPAIR (Continued).
LOCATION/ITEM
ACTION
REMARKS
NOTE
The testing procedure for delivery
port No. 2 is similar to delivery port
No. 1.
The delivery pressure of port
No. 2 may be 2 psi less than delivery
port No. 1.
45, Valve (6).
Install on truck.
Refer to TM 9-2320-283-
20.
46. Air system
Close.
Refer to TM 9-2320-283-
draincocks.
10.
47. Delivery port No.
Remove nonmetallic tube.
Refer to TM 9-2320-283-
1 on right-hand
20.
side of valve (6).
48. Air pressure gage. Connect to port No. 1.
Suitable gage, O-200
psi.
49. Engine.
Start up.
Operate until
Maximum pressure is
maximum reservoir pressure
approximately 120 lbs.
is reached.
50. Pedal.
Depress the pedal to several
The delivered air
positions between the fully
pressure on the air
released and full applied
pressure gage should
positions.
vary proportionately
with the movement of the
brake pedal. When the
pedal is fully depress-
ed, the reading on the
air pressure gage should
fall off to zero when
the pedal is released.
If gage does not return
to zero, refer to steps
1 through 42 for repair
of brake valve.
51. Engine.
Shutdown.
Refer to TM 9-2320-283-
10.
3-754