TM-9-2320-283-34-2

TRUCK TRACTOR, LINE HAUL, 50,000 GVWR, 6X4, MQ15A1

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

DECEMBER 1983

TM-9-2320-283-34-2 - Page 204 of 570

B. CLEANING.

A.DISASSEMBLY.

TM 9-2320-283-34-2

BRAKE SYSTEM.

3-81. BRAKE SHOE REPAIR (Continued).

LOCATION/ITEM

ACTION

REMARKS

CAUTION

Do not drill out old rivets. Drilling

out old rivets can enlarge holes and

prevent new rivets from holding.

NOTE

•The procedure covers lining replace-

ment for one front and one rear brake

shoe.

Use this same procedure from

any front or rear brake shoe and

always reline in pairs.

For example,

if the lining is replaced on the left

front brake, the right front brake

should be relined also.

Relining a

brake on one axle end only may cause

uneven braking.

*To remove oil rivets, push out using

brake and clutch reliner or a 1/8"

diameter flat head drift.

1. Two linings (2)

and thirty

rivets (3).

2. Two linings (5)

and twenty-two

rivets (3).

Remove from item (1).

Remove from item (4).

Discard items (2) and

(3).

3. Shoes (1) and (4).

Remove dirt, scale, rust, and

paint.

3-760