B. CLEANING.
C. INSPECTION.
D. INSTALLATION.
A. REMOVAL.
TM 9-2320-283-34-2
BRAKE SYSTEM.
3-786
3. All parts.
Clean.
Refer to paragraph 3-4.
4. All parts.
Inspect.
Refer to paragraph 3-5.
5. Governor assembly
(3) and valve (5).
Clean mating surfaces.
Refer to paragraph 3-4.
6. Governor assembly
(3) and new gasket
Install on item (5).
(4).
7. Two screws (1) and
lockwashers (2).
Install into item (3), and
tighten.
1. Two screws (1) and
lockwashers (2).
Remove from item (3).
2. Governor assembly
(3) and gasket (4).
Remove from item (5).
Discard item (4).
3-84. AIR COMPRESSOR GOVERNOR REPLACEMENT (Continued).
LOCATION/ITEM
ACTION
REMARKS
NOTE
Follow-on maintenance action required:
Install air compressor governor air
lines and fittings (TM 9-2320-283-20).
Adjust air compressor governor
(para 3-83).