TM 9-2320-283-34-2
STEERING SYSTEM.
3-94. STEERING PUMP AND RESERVOIR REPAIR (Continued).
LOCATION/ITEM
ACTION
REMARKS
C. ASSEMBLY (Continued).
12. Two studs (2).
Install into item (1).
If removed during step
6.
13. New gasket (3).
a. Install on item (1) with
color side facing out.
b. Coat with a small amount
This is done to hold
of clean grease.
item (3) in place during
assembly of items (1)
and (8).
14. Two new washers
(4).
Place on two items (2).
15. Reservoir (8).
Carefully aline and place on
item (1).
Some tapping with a
soft-faced hammer or
mallet may be necessary
to position reservoir
properly.
16. Two nuts (10)
and two new
washers (4).
Screw onto two items (2).
Torque items (10) to
20-30 lb-ft.
17. Cap (9).
Install into item (8).
3-836
NOTE
Follow-on maintenance action required:
Install steering pump and reservoir
(TM 9-2320-283-20).
Fill and bleed steering system
(TM 9-2320-283-20).
Check steering pun
(TM 9-2320-283-20).
operation