TM 9-2320-283-34-2
FRAME AND TOWING ATTACHMENTS.
3-97. FIFTH WHEEL REPAIR (Continued).
LOCATION/ITEM
ACTION
REMARKS
C. ASSEMBLY (Continued).
46. Plate (6)
(continued).
d. Secure to item (8) with
When properly assembled,
items (9), (10), and (11). there should be one item
(10) above item (6) and
one item (10) below item
(6). Tighten item (9)
enough to allow free
movement of item (6).
Make sure item (9) goes
into recess of item (12)
when installed.
47. Block (16),
Install onto item (12).
washer (15), and
Tighten item (14) until
nut (14).
item (16) is against
item (28). Do not
compress item (13) by
tightening item (14).
48. Handle (19).
Insert offset end thru loop
of item (28), and into hole
(54) in item (20).
49. Lock (20) and
spring (17).
a. Install onto item (28) and
line up holes in item (17)
and hole (55) in item (20)
with hole (56) in item
(28).
b. Secure with item (18).
Use suitable hoist to
lift item (28) if
necessary to install
item (18). Use a
suitable drift pin to
keep items (17), (20),
and (28) lined up while
installing item (18).
50. Handles (19) and
(21), and two
a. Pull out item (19) until
it catches on item (28).
lockjaws (26) and
(27) l
b. Pull out item (21) and pry
open items (26) and (27).
3-856