TM-9-2320-283-34-2

TRUCK TRACTOR, LINE HAUL, 50,000 GVWR, 6X4, MQ15A1

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

DECEMBER 1983

TM-9-2320-283-34-2 - Page 304 of 570

TM 9-2320-283-34-2

Section XIII. SPRING SHOCK ABSORBERS, AND TORQUE RODS

This section provides procedures authorized at direct and general support

maintenance levels to replace

and repair springs, shock absorbers, and torque

rod components.

To find a specific procedure contained in this section, see

the task summary below:

3-99. TASK SUMMARY.

INITIAL SETUP

EQUIPMENT CONDITION

APPLICABLE CONFIGURATIONS

PARAGRAPH

CONDITION DESCRIPTION

All.

(Refer to specific paragraph for this

information).

TEST EQUIPMENT

None.

SPECIAL TOOLS

Equalizing beam service set

(45225) Y-8500A.

Receiving tube

(45225) Y-860.

Removing adapter

(45225) Y-862.

Installing adapter

(45225) Y-862.

Torque rod bushing service set

(45225) Y-820.

MATERIALS/PARTS (P/N)

Solvent, drycleaning, SD-2

Sleeve bushing (end; as required)

Item 31, Appendix C.

(28158) 6572.

Grease, automotive and artillery

Cotter pin (3)

Item 7, Appendix C.

(24617) 1034111.

Rags, wiping

Special shackle pin screw (3)

Item 26, Appendix C.

(34623) MB279-20000.

Spring assembly

(28158) 45121.

Spring clip rivet (3)

Sleeve bushing (center;

(24617) 110432.

(28158) 5919.

as required) Bushing (as required)

(281583 44695.

PERSONNEL REQUIRED

Two (MOS-63W).

SPECIAL ENVIRONMENTAL CONDITIONS

Work area clean and away from blowing

dirt and dust.

REFERENCE (TM)

TM 9-2320-283-10.

TM 9-2320-283-30.

GENERAL SAFETY INSTRUCTIONS

Block front wheels.

TM 9-2320-283-34P.

TROUBLESHOOTING REFERENCES

None.

3-860