TM-9-2320-283-34-2
TRUCK TRACTOR, LINE HAUL, 50,000 GVWR, 6X4, MQ15A1
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE
DECEMBER 1983
TM-9-2320-283-34-2 - Page 312 of 570
TM 9-2320-283-34-2
SPRINGS, SHOCK ABSORBERS, AND TORQUE RODS.
14. All parts.
Inspect,
3-100. REAR TANDEM AXLE SPRING AND SADDLE REPLACEMENT (Continued).
LOCATION/ITEM
ACTION
REMARKS
Refer to paragraph 3-5.
15. Saddle (17).
16. Bushing (18).
Position on item (10).
Install in item (8).
Use a suitable bushing
driver for installation.
17. Spring assembly
Use a floor crane for
(8).
Slide into item (9) and item
(2) then position onto item
(17).
lifting and sliding into
position.
18. Pin (19).
Install in item (2).
Coat outside of pin with
assembly lube. Insert
slotted end of item (19)
toward inside of item
(2).
19. Drawkey (3).
Carefully insert into drawkey Item (3) is installed at
hole of item (2).
the rear of item (2).
Threads of item (3) are
exposed at the front of
item (2).
3-868
Back to Top
