TM-9-2320-283-34-2
TRUCK TRACTOR, LINE HAUL, 50,000 GVWR, 6X4, MQ15A1
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE
DECEMBER 1983
TM-9-2320-283-34-2 - Page 314 of 570
TM 9-2320-283-34-2
SPRINGS, SHOCK ABSORBERS, AND TORQUE RODS.
3-100. REAR TANDEM AXLE SPRING AND SADDLE REPLACEMENT (Continued).
LOCATION/ITEM
ACTION
REMARKS
20. Nut (1) and
Install onto item (3) and
lockwasher (21).
torque to 75-100 lb-ft.
21. Fitting (20).
Install in item (19).
Lubricate item (20) with
grease.
22. Pad (6).
Position, with setscrew holes
on the inside, onto item (8).
23. Four screws (4)
Insert into holes of item
and washers (5).
(6).
24. Four nuts (15)
and washers (16).
Install onto four items (4)
and torque to 275-300 lb-ft.
25. Two setscrews (7).
Install into item (6) and
torque to 100-1500 lb-ft.
26. Beam (10).
Lift up and into item (17).
Use a suitable floor
jack for lifting.
27. Four nuts (12)
Install onto four items (11)
Detach overhead crane
and washers (13).
and torque to 225-275 lb-ft.
when step 27 is
completed.
NOTE
Follow-on maintenance action required:
Install forward-rear tandem tires
(TM 9-2320-283-10).
3-870
Back to Top
