TM 9-2320-283-34-2
SPRINGS, SHOCK ABSORBERS, AND TORQUE RODS.
3-101. REAR TANDEM AXLE SPRING HANGER REPLACEMENT (Continued).
LOCATION/ITEM
ACTION
REMARKS
9. Frame assembly
(6).
a. Using suitable lifting
device, lift until weight
of vehicle Is off item
(14).
b. Support with jack stands.
10. Rear-rear axle
assembly (10).
Using floor jack, raise until
weight of item (14) is off
item (7).
11. Two screws (1)
and nuts (4).
Remove from items (7), (3),
and (6).
12. Six screws (1),
nuts (4), bracket
Remove from item (6).
Item (7) cannot be
(51, hanger (7),
removed from item (14)
at this time.
and plate (3).
13. Rear-rear axle
assembly (10).
Using floor jack, lower until
tension of item (14) is off
item (11).
14. Three screws (1),
nuts (4), and
Remove from item (6).
hanger (11).
15. Hanger (7).
Remove from item (14).
16. Bolt (13), Iock-
washer (8), nut
Remove from item (7).
(9),
(12).
and spacer
3-876