TM-9-2320-283-34-2

TRUCK TRACTOR, LINE HAUL, 50,000 GVWR, 6X4, MQ15A1

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

DECEMBER 1983

TM-9-2320-283-34-2 - Page 324 of 570

TM 9-2320-283-34-2

SPRINGS, SHOCK ABSORBERS, AND TORQUE RODS.

3-101. REAR TANDEM AXLE SPRING HANGER REPLACEMENT (Continued).

LOCATION/ITEM

ACTION

REMARKS

25. Plate (3).

Install between item (7) and

bottom of item (6).

26. Two screws (1)

Install into items (7), (3),

and nuts (4).

and (6), but do not tighten.

27. Eight screws (1)

and nuts (4).

Tighten.

28. Hanger (2),

bracket

(5), six

screws

nuts (4).

29. Plate (3).

30. Two screws (1)

Install into items (2), (3),

and nuts (4).

and (6), but do not tighten.

31. Eight screws (1)

and nuts (4).

Tighten.

32. Forward-rear axle

assembly (15).

Using floor jack, raise or

lower until pin hole in item

(2) lines up hole in item

item (14).

33. Pin (18).

Install on side of item (6),

but do not tighten.

Install between item (2) and

bottom of item (6).

Drive into items (2) and

(14).

Force item (14) down if

necessary to install

item (2).

Do not in-

stall two items (1) and

(4) in bottom of items

(2) and (6) until step

32.

Make sure drawkey slot

in item (18) is toward

bottom of item (2).

Adjust floor jack as

necessary to install

item (18).

3-880