TM 9-2320-283-34-2
CAB AND BODY.
3-109. CAB INSULATORS REPLACEMENT (Continued).
LOCATION/ITEM
ACTION
REMARKS
NOTE
•Left and right front insulator removal
is similar, except as noted below,
Left front insulator is removed here.
•Skip step 1 if removing right front
insulator.
1. Front left corner
Pull back far enough to reach
of floormat.
access hole.
2. Screw (2), washer
(3) (lower),
Remove from item (4).
Assistant helps remove
and nut (6).
item (2), (3) (lower),
and (6). Discard item
(6).
WARNING
Cab is heavy.
Do not attempt to work
below cab once raised, unless cab is
safely blocked.
Failure to follow
this precaution may result in serious
injury to you and to other personnel.
3. Cab (1).
a. Using suitable lifting
device, raise left side of
item (1) about 1-1/2 to 2
inches above item (3)
(upper) and (4).
b. Support with wood block.
4. Washer (3)
(upper).
Remove from item (4).
3-930