TM 9-2320-283-34-2
CAB AND BODY.
3-109. CAB INSULATORS REPLACEMENT (Continued).
LOCATION/ITEM
ACTION
REMARKS
NOTE
Left and right rear insulators are
installed in same way.
Left rear
shown here.
19. Insulator (4).
a. Lubricate.
b. Install in item (8).
20. Washer (3)
Slide over item (4) and line
(upper).
up hole in item (3) (upper)
with hole in item (4).
21. Cab (1).
a. Remove support blocks.
b. Using suitable lifting
device, lower onto item
(3) (upper) and (4).
c. Secure with two items
(2), (3) (lower), two
new items (6).
22. Center rear floor- Lay into position.
mat.
Assistant helps secure
items (2), (3) (lower),
and (6).
Torque to 130
lb-ft.
23. Fire extinguisher. Install.
Refer to TM 9-2320-283-
10.
24. Reducer (5).
a. Slide up in position.
b. Tighten.
Check for exhaust leaks.
If leaks are found,
replace item (5). Refer
to TM 9-2320-283-20.
25. Spare tire.
Install in carrier.
Refer to TM 9-2320-283-
10.
3-936