TM-9-2320-304-14-P

LOAD HANDLING SYSTEM, HEAVY EXPANDED MOBILITY TACTICAL TRUCKS (HEMTT)

TECHNICAL MANUAL; OPERATOR’S, ORGANIZATIONAL, AND DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

AUGUST 2000

TM-9-2320-304-14-P - Page 157 of 1320

TM 9-2320-304-14&P

2-82.13

Operating Instructions (Cont)

WARNING

Make sure not to hold on to front of slider when stowing. Hands and fingers may be pinched

between front of slider and hard lift bracket causing injury to personnel.

NOTE

•

Rear of slider may have to be pulled out slightly to position front of slider on

retaining bracket.

•

Pivot lock pins may not lock if lock pin receptacle is full of debris. If this occurs,

remove debris and lubricate lock pin and lock pin fitting.

(23)

Pull down pivot lock pin handle (24), lift rear of slider (4), and rotate front of slider over

retaining plate (25) until pivot lock pins lock.

(24)

Release pivot lock pin handle (24).

(25)

Repeat steps (16) through (24) for right side.

Change 1