TM-9-2320-304-14-P

LOAD HANDLING SYSTEM, HEAVY EXPANDED MOBILITY TACTICAL TRUCKS (HEMTT)

TECHNICAL MANUAL; OPERATOR’S, ORGANIZATIONAL, AND DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

AUGUST 2000

TM-9-2320-304-14-P - Page 161 of 1320

TM 9-2320-304-14&P

2-82.17

Operating Instructions (Cont)

(6)

Apply service brake pedal (4) and set transmission range selector (5) to N (Neutral).

(7)

Put PTO ENGAGE switch (7) in ON position. Make sure indicator light (8) comes on.

CAUTION

Engine speed must be at idle before using hydraulic selector switch, or damage to

equipment may result.

(8)

Turn hydraulic selector switch (9) to AUTO.

CAUTION

On steep downgrades, contact is possible between the front lift adapter lower legs and the

rear sliders during empty LHS cycles. If contact appears likely, switch hydraulic selector to

MAN H.A. position and retract (LOAD) hook arm a few inches. Return hydraulic selector to

AUTO and continue (UNLOAD) operation. Repeat as required. Failure to comply may

result in damage to equipment.

(9)

Move joystick (10) to UNLOAD position until front lift adapter (1) is positioned in front of

container (6).

Change 2