TM-9-2320-304-14-P

LOAD HANDLING SYSTEM, HEAVY EXPANDED MOBILITY TACTICAL TRUCKS (HEMTT)

TECHNICAL MANUAL; OPERATOR’S, ORGANIZATIONAL, AND DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

AUGUST 2000

TM-9-2320-304-14-P - Page 294 of 1320

TM 9-2320-304-14&P

2-82.144

Operating Instructions (Cont)

2-10.10 RAIL TRANSPORT.

a. Rail Transport Strut Installation.

NOTE

•

Make sure ISO lower corner castings are free of dirt and debris.

•

There are two ISO corner locks. Both are installed the same way. Right side

shown.

•

Make sure container is fully loaded on truck and rear container locks are installed

(Para 2-10.2 through Para 2-10.5).

(1)

Remove lock pin (1) from bracket (2) and lift tab (3) to unlock handle (4).

(2)

Loosen handnut (5), rotate lock handle (4) 90 degrees, and remove ISO corner lock (6) from

stowage tray (7).

Change 1