TM-9-2320-304-14-P

LOAD HANDLING SYSTEM, HEAVY EXPANDED MOBILITY TACTICAL TRUCKS (HEMTT)

TECHNICAL MANUAL; OPERATOR’S, ORGANIZATIONAL, AND DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

AUGUST 2000

TM-9-2320-304-14-P - Page 410 of 1320

Malfunction

Test or Inspection

Corrective Action

TM 9-2320-304-14&P

4-32

Organizational Maintenance Instructions (Cont)

4-18. TROUBLESHOOTING INSTRUCTIONS (CONT).

Table 4-3. Load Handling System (LHS) Troubleshooting (CONT)

LOAD HANDLING SYSTEM (LHS) (CONT)

2. LHS NO TRANSIT INDICATOR DOES NOT OPERATE (CONT).

WARNING

•

Remove all jewelry such as rings, dog tags, bracelets, etc. If jewelry or tools contact

positive electrical circuits, a direct short may result. Damage to equipment and

injury or death to personnel may occur.

•

Keep clear of equipment when equipment is being raised or lowered. Equipment

may fall and cause serious injury or death to personnel.

CAUTION

When opening the main junction box, do not pull or allow front of junction box to hang by

wire connections. Failure to comply will damage the wire connections.

Step 8.

Check for 22 to 28 Vdc at main junction box terminal 11 with hook arm up and ENGINE

switch in ON position.

If Vdc measurement is below specification, turn ENGINE switch to OFF position,

replace proximity switch (

Para 4-35

).