TM-9-2320-304-14-P

LOAD HANDLING SYSTEM, HEAVY EXPANDED MOBILITY TACTICAL TRUCKS (HEMTT)

TECHNICAL MANUAL; OPERATOR’S, ORGANIZATIONAL, AND DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

AUGUST 2000

TM-9-2320-304-14-P - Page 419 of 1320

Malfunction

Test or Inspection

Corrective Action

TM 9-2320-304-14&P

4-41

Organizational Maintenance Instructions (Cont)

Table 4-3. Load Handling System (LHS) Troubleshooting (CONT)

LOAD HANDLING SYSTEM (LHS) (CONT)

3. LHS OVER LOAD INDICATOR DOES NOT OPERATE (CONT).

WARNING

Remove all jewelry such as rings, dog tags, bracelets, etc. If jewelry or tools contact positive

electrical circuits, a direct short may result. Damage to equipment and injury or death to

personnel may occur.

Step 5.

Check continuity on wire 1460 at overload pressure switch harness connector terminal 1

with harness connector MC81 terminal N jumpered to ground.

If there is no continuity, remove jumperwire from harness connector MC81 to

ground and repair wire 1460 or notify DS Maintenance.